1. Employs a frequency inverter to control the high frequency motor that drives the spindle for carving operations. It is suitable for carving surfaces. and three-dimensional artistic products etc.
2. Wide spindle speed 9000, 12000 RPM for choice. Provides choice of 2, 4, 6, 8 and 12 spindle configuration a VCD describing the machine operation is available upon cutting capacity and length can be specified by customers request.
3. Cutterhead can be adjusted in vertical, cross longitudinal directions. Carve angle can be set in the range of 30 - 120.
4. Cutter of double head 1s used 1n the wide spindle. It can se1e one head of the cutter types according to the sample profile.
5. The procedure of producing rough model by this machine is abouts 10 times faster then by man.
6. The products made by machine will not be transformed in addition, this machine is firm and durable in using and can be
operated easily.
Operation Instructions
The operator fixes the template on the middle shaft, both ends. Install
the cutter on the spindle. The opei along the template for 360 carve capacity.
Optional Equipment
(D)
45mm
36mm
30mm
24mm
18mm
12mm
9mm
4.5mm
(L)mm
105mm
105
105
105
105
105
105
105
105
120mm
120
120
120
120
120
120
150mm
150
150
150
150
Model
2-Axis
4-Axis
6-Axis
8-Axis
Process In Size
300mm
300mm
300mm
300mm
Process In Length
900mm
900mm
900mm
900mm
Using Motor
Main Axis
1/2HP x 2
Movement Of Working Objects
1HP x 1
Main Axis
1/2HP x 4
Movement Of Working Objects
1HP x 1
Main Axis
1/2HPx6
Movement Of Working Objects
2HP x 1
Main Axis
1/2HP x 8
Movement Of Working Objects
2HP x 1
N.W.
1400kgs
1700kgs
1900kgs
2100kgs
G.W.
1700kgs
2000kgs
2150kgs
2500kgs
Mechine Diamesions
2160 x 2000 x 1700(mm)
2700 x 2000 x 1700(mm)
3060 x 2000 x 1700(mm)
3660 x 2000 x 1700(mm)
Packing Diamesions
2285 x 2140 x 1580 (mm)
2825 x 2140 x 1580 (mm)
3185 x 2140 x 1580 (mm)
4260 x 2230 x 2040 (mm)
Remark
Quick Navigator Menu: (Right-Click again to close this menu.)
