HOME > Product > Sawing & Angle Cutting Machine > JIH-455 (Series) Sawing Machine > JIH-455 B Type

Quantity:
Picture of JIH-455 NC Fully Automatic High Production Sawing Machine for JIH-455 B Type
Feature
1. Automation feed, positioning. oil splashing and sawing.
2. Feed stroke 500mm. (Reciprocating feed stroke up to any limit for length)
3. Concealed type sawblade performs upward cutting lor increased safety.
4. Ball screw is driven by servo motor for high accuracy. (Transmission through precision ground rack is available)
5. Equipped With Mitsubish: NC control. PLC features extremely stable control performance. Employs CE certified control components.
6. Feed is driven by hydraulic system, providing maximum stability of cutting.
7. Two sets each of held-down clamps and one set side clamps provided on the feeding system permits cutting of irregular work piece.
8. 100 sets of size memory capacity. Each set allows for setting 12 sizes.
9. The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
10. During operation, the machine provides detection for lock of material. Available to set tail length to be cut.
11. Workpieces can be stacked.
12. Maximum feed speed is of up to 60 m/min.
13. Maximum cutting rate is 4 seconds for one cutting.
14. Feed Methods: 1. Stepping feed, 2. Reciprocating feed, 3. Manual feed
 
Specially Design Cutting Motion:
After the sawblade moves upward for cutting, table moves to right and left for retracting 2 mm. Then the sawblade lowers to its home return-cutting. while ensuring fine surface of cut and cutting accuracy.
The clamps on the feed tale are suited for cutting irregular stock without need of additional fixtures to fix the workpiece.
Auxiliary support prevents workpiece deflection.
Transmission Device
Employs precision ground rack with accuracy up to 0.02mm (suitable for 3 and 6 meter feed travel)
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.

Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.


Standard Accessories
24" sawblade x 1pcs (or available for custom-made), tool box

Optional Accessories
3 or 6 meters automatic feed device
Choice of precision ground rack or ball screw
Dust collector and suction hose
Infeed roller conveyor
Sawblade
Automatic air blast device

Model JIH-455 B Type
Automatic Drive system Ball screw (Servo motor drive)
Cutting Capacity (H x W) 190 x 190, 50 x 320, 20 x 420 mm (Same as cutting capacity chart for JIH-24D Type)
Max. Feed Distance (one time) 500mm Unlimited recycle feed distance
Automatic Feed Accuracy ± 0.1mm
Cutting Lenght Display & Set UP By touch screen
Saw Spindle Speed 2000R.P.M.
Saw Spindle Motor 10HP
Hydraulic Feed Motor 1HP
Servo Motor 500 w (1k opt.)
Touch-Sensing Screen 5.7"
Sawblade Sizes 24" x 1" bore
Air Pressure 4~6 kgs/cm²
Machine Diamesions 2500 x 1300 x 2020 mm
Packing Diamesions 2620 x 1420 x 2220 mm
Machine Weight 1600 / 2000 kgs

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.