HOME > Product > Sawing & Angle Cutting Machine > JIH-30 (Series) Sawing Machine > JIH-30 D Type

Picture of JIH-30 Sawing Machine for JIH-30 D Type

1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
3. While cutting, the oil mist splashes automatically for cooling and lubrication.
4. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
6. The machine permits 90 and 45 degree cutting.

1. Clamping system is controlled by an independent air cylinder.

2. Clamping system moves on linear guideway, that assures stable clamping.


1. The clamping speed and cutting speed can be adjusted according achieve superior cutting performance (Fast and stable cutting). /clamps workpieces securely.

2. Clamping pressure can be adjusted as desired to suit work piece t on the work piece due to over-pressure. to work piece type to The clamping system ype, that avoids damage.

1. Adjustable clamping height.

2. Adjustable clamping speed.

3. Adjustable cutting height.

4. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.

5. Push-pull type safety guard.

6. Horizontal clamping for extremely stable clamping.

7. Accurately controlled oil mist system. greatly improves lubrication and cooling effect, while reducing trouble to a minimum.

1. The convenient door for saw blade replacing. Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those Atyped machine.

2. Chip Outlet Port The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.

Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment
30" sawblade x 1pcs, replace sawblade tool

Optional Equipment
Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard, horizontal clamping, hydraulic feed system

Model JIH-30 D Type
Cutting Capacity (H x W) 240x240, 200x400, 150x530, 100x570, 50x580mm
Saw Feed System pneumatic-hydraulic (opt. hydraulic)
Sawblade Side 760MM (50MM bore)
Spindle Speed 1500RPM
Chip Outlet 4"
Spindle Motor 15PH (20HP optional)
Worktable Size 820x820mm
Net Weigth 580kgs
Gross Weigth 680kgs
Machine Size (L x W x H) 1430x1030x2050mm

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.