HOME > Product > Sawing & Angle Cutting Machine > JIH-24 (Series) Sawing Machine > JIH-24 C Type

Picture of JIH-24C Semi Automatic Sawing Machine for JIH-24 C Type

1. To operate the machine, simply treadle on the foot switch, the machine wil automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
3. While cutting, the oil mist splashes automatically for cooling and lubrication.
4. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
6. The machine permits 90 and 45 degree cutting.

1. Adjustable clamping speed.
2. Adjustable cutting height.
3. Adjustable cutting speed.
The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving waiting time.
4.Accurately controlled oil mist system greatly improves lubrication and cooling effect, while reducing trouble to a minimum.

1. The Convenient Door For Saw Blade Replacing Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those typed machine.
2. Chip Outlet Port
The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.

Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment
18" sawblade x 1pc., handle for changing sawable

Optional Equipment
Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard, horizontal clamping, hydraulic feed system

Model JIH-24 C Type
Cutting Angle 90° or 45°
Spindle Speed 2000 R.P.M.
Sawblade Size 24" x 1"bore
Table Area 660 x 700mm
Table Height From Floor 830mm
Motor 7 1/2 HP
Air Pressure 4-6kg/cm²
Converor Length (opt.) 1meter-7meter
Mechine Dia. (L x W x H) 1310 x 830 x 1460mm
Packing Dia. (L x W x H) 1430 x 950 x 1660mm
N.W. / G.W. 480 / 580kgs

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.