1. To operate the machine, simply treadle on the foot switch,
the machine will automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade perfonns upward cutting. Single or multiple workpieces can be cut simultaneously.
3. While cutting, the oil mist splashes automatically for cooling and lubrication.
4. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
5.The machine cabinet painting is baked by high temperature of 200° (powder coating) for resisiting bumping without paint peeling off.
6. The machine permits ± 0 ~ 45° cutting.
1. Clamping system mover on linear quide way, that stable clamping.
2. Clamping system is controlled by an independent air cylinder.
(1+2 Feature: Clamping pressure can be adjusted as desired to suit work piece
type, that avoids damage on the work piece due to over-pressure)
3. Adjustable clamping height.
4. Adjustable clamping speed.
5. Adjustable cutting speed.
(3+4+5 Feature: According to work piece type to adjust the clamping height and speed and cutting height and speed)
6. Accurately controlled oil mist system greatly improves lubrication and cooling effect, while reducing trouble to a minimum.
7. The handle for convenient and easy fix worktable.
8. Hold handle for rotary worktable angular (± 0 ~ 45°)
When equipped with the quick positioning button and the guick positioning hole, the freqently applied angles such as 22.5°, 30° and 45° can be fast positioned for increasing efficiency.
1.The Convenient Door For Saw Blade Replacing Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those typed machine.
2. Chip Outlet Port
The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.
36'" sawblade x 1pc, Handle for changing sawblade
Automatic rotary for angle degree (opt-servo motor drive gear guild way with touch sense screen; or opt-M15 LCD display with general motor) Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard¡Bhorizontal clamping, hydraulic feed system LCD display for angle degree.
JIH-20 36 Type
+45°~ 0°~ -45°
36"mm x 50mm (bore)
Saw Spindle Speed
1500 x 770mm
Worktable Height Form Floor
1800 / 2300kgs
Mechine Dia. (L x W x H)
1770 x 1580 x 2520mm
Packing Dia. (L x W x H)
1900 x 1700 x 2230mm
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
Quick Navigator Menu: (Right-Click again to close this menu.)