HOME > Product > Sawing & Angle Cutting Machine > JIH-18C (Series) Sawing Machine > JIH-18C F Type

Quantity:
Picture of Cut-Off Saw for JIH-18C F Type

Feature
1. To operate the machine, simply treadle on the foot switch, the machine wil automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
3. Cutting feed is driven by hydraulic power unit for extremly stable cutting speed.
1. Adjustable clamping speed.
2. Adjustable cutting height.
3. Adjustable cutting speed.The operator may adjust clamping height and speed a cutting height and speed according to work piece size and thickness for saving wait time.
4. Accurately controlled oil mist system greatly improves lubrication and cooling effect, while reducing trouble to a minimum.
5. Hydraulic feed system.
1. The Convenient Door For Saw Blade Replacing
Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those typed machine
2. Chip Outlet Port
The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The sawblade spindle is heat treated and plated for greatly increasing the spindle life

Standard Equipment
18" sawblade x 1, sawblade, horizontal clamps

Optional Equipment
Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard, horizontal clamping, hydraulic feed system

Model JIH-18C F Type
Cutting Angle 90° or 45°
Spindle Speed 800 R.P.M.
Sawblade Sizes 16" or 18" bore
Table Area 640 x 380 mm
Table Height From Floor 860 mm
Spindle Motores 5HP (8P)
Hydraulic Motor 1HP
Air Pressure 4-6kgs/cm²
Converor Length (opt.) 1meter ~7meter
Mechine Dia. (L x W x H) 1100 x 800 x 1620 mm
Packing Dia. (L x W x H) 1220 x 920 x 1820 mm
N.W. / G.W. 450 / 550kgs