HOME > Product > Sawing & Angle Cutting Machine > JIH-18C (Series) Sawing Machine > JIH-18C C Type

Picture of Cut-Off Saw for JIH-18C C Type

1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
3. While cutting, the oil mist splashes automatically for cooling and lubrication.
4. Cutting feed is driven by a air / hydraulic combination cylinder for extremely stable cutting speed.
5. The machine cabinet painting is baked by high temperature of 200 degree (powder coating) for resisting bumping without paint peeling off.
6. The machine permits 90 and 45 degree cutting.
a. The use of control panel combined with operation sequence label and instruction labels increase operational convenience.
b. Table: The specially designed table is precision ground and hard chrome plated to avoidscatching on the table surface. No rusting in 10 years of operation.
c. The one-piece fabricated aluminum alloy fence permits 45° cutting If features light weight and can be easily mounted on the machine.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving wait time.
3. Adjustable cutting speed.
1. The Convenient Door For Saw Blade Replacing
Open the side door to replace the blade. The door can load the whole blade and there won't be any inconvenience for the blade installation as those Atyped machine.
2.Chip Outlet Port.
The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The sawblade spindle is heat treated and plated for greatly increasing the spindle life.

Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Optional Equipment
Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard, Hydraulic feed system

Model JIH-18C C Type
Cutting Angle 90° or 45°
Spindle Speed 3200R.P.M.
Sawblade Sizes 18" x 1" bore
Table Area 640 x 380mm
Table Height From Floor 860mm
Motor 5 HP (7.5HP or 10HP opt.)
Air Pressure 4-6kgs/cm²
Converor Length (opt.) 1meter-7meter
Mechine Dia. (L x W x H) 840 x 800 x 1250mm
Packing Dia. (L x W x H) 960 x 920 x 1450mm
N.W. / G.W. 330 / 410kgs

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.