HOME > Product > Sawing & Angle Cutting Machine > JIH-18C (Series) Sawing Machine > JIH-18C A Type

Picture of Cut-Off Saw for JIH-18C A Type

1. To operate the machine, simply treadle on the foot switch, the machine wil automatically perform clamping and cutting for convenient operation.
2. Concealed sawblade performs upward cutting. Single or multiple workpieces can be cut simultaneously.
3. While cutting, the oil mist splashes automatically for cooling and lubrication.
4. Cutting feed is driven by a air/hydraulic combination cylinder for extremely stable cutting speed.
5. The machine cabinet painting is baked by high temperature of 200 degree (Powder coating) for resisting bumping without paint peeling off.
6. The machine permits 90 and 45 degree cutting.

1. Adjustable clamping height.
2.Adjustable cutting speed. The operator may adjust clamping height and speed and cutting height and speed according to work piece size and thickness for saving wait time.
3. Adjustable cutting speed.

1. Convenient Sawblade Replacement Door
When replacing sawblade is required, open the door, the entire sawblade can enter completely. This feature facilitate sawblade replacement.
2.Chip Outlet Port
The chips are exhausted through this outlet port. It eliminates inconvenient cleaning for those chip deposited in the machine.

Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
The sawblade spindle is heat treated and plated for greatly increasing the spindle life

Suitable For Cutting Various Materials
Aluminum, brass, heat sink, PVC, plastic steel, Bakelite, acrylic plastic, teflon, honeycomb board, wood and other non-ferrous metals.

Standard Equipment
18" sablade x 1"(bore), handle for changing sawblade

Optional Equipment
Infeed and outfeed roller conveyor, dust outlet, dust hood, dust collector, guard, Horizontal clamping, Hydraulic feed system

Model JIH-18C A Type
Cutting Angle 90° or 45°
Cutting Capacity (HxW) 110x110, 110x220, 60x270, 20x300 mm
Spindle Speed 3200 R.P.M.
Sawblade Size 18"x1" bore
Table Area 640x380mm
Table Height From Floor 860mm
Motor 5 HP (7.5HP or 10HP opt.)
Air Pressure 4-6 kgs/cm²
Conveyor Length (opt.) 1-7 M
Machine Diamesions (LxWxH) 840 x 800 x 1250 mm
Packing Diamesions (LxWxH) 960 x 920 x 1450 mm
N.W. / G.W. 300 / 380kgs

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.