HOME > Product > Sawing & Angle Cutting Machine > JIH-14 45 Degree Double-Blade Angular Sawing Machine > JIH-12 (Horizontal) 45 Degree Double-Blade Angular Sawing Maching

Picture of JIH-12 (Horizontal) 45 Degree Double-Blade Angular Sawing Maching


  • When the foot panel switch is pressed the machine will perform material clamping and cutting automatically.
  • Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
  • Vertical and horizontal workpiece clamping design ensures extremely firm for any type of aluminum workpiece.
  • Work piece clamping pressure is adjustable to eliminate material deformation problem.
  • Automatic oil mist colling for sawblades provides burr-free surface of cut, while extending sawblade life.
  • Alternatively sawblades straight feed in horizontal direction allows large cutting width.
  • Equipped with wear-resistant linear motion guides for accurate angle of cut.
  • Allows for right or left cutting individually.
  • Right and left cutting alternatively fully eliminates waste of workpie.ce.
  • Cutting angle is easy to adjust.
  • Gap between gauge and sawblade is adjustable no burr after sawing.
  • Both side of the machine are equipped with a 2.4m infeed and a 2.4m outfeed conveyor table for convenient repetitive.
  • The machine performs a 45 degrees miter cut. Designed for high speed cutting of extrudes strip, door and window frames.

Cutting Angle 45°
Cutting Width 140 mm / 160 mm
Cutting Height 90 mm / 70mm
Sawblade Sizes Ø12" x Ø1" x 2pcs
Sawblade Speed 3200R.P.M.
Spindle Motores 2HPx2
Clamping Method 4 (2 Vertical clamps + 2 Horizontal clamps)
Table Area 1160 x 150 mm
Table Height From Floor 840mm
Infeed/Outfeed Conveyor Length 2400 mm
Net/Gross Weight 360 / 460 kgs
Machine Dim. (LxWxH) 1500 x 880 x 1150 mm
Packing Dim. (LxWxH) 1620 x 1000 x 1350 mm

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.