| Feature |
| 1. This machine is designed for punching hold and pressing. |
| 2. It has an easy operate hydraulic system that delivers powerful punching performance at very low noise levels. |
| 3. It has both manual and automatic operation capabilities. When the foot panel switch is press, the machine will perform punching hold (pressing) automatically. |
| 4. Suitable for two-layer mold machining (JIH-250B, JIH-250C). |
| 5. The upper base is organic whole shaping, which has strong tenacity, maximum impact resistance and long service life (JIH-250B, JIH-250C ). |
| Optional Function: |
| 1. Quicken punching head speed (high-speed punching head). |
| 2. The punch head can choose between equipped with a limit
switch, equipped with a timer switch or equipped with pressure switch for controlling the stroke |
 |
 |
 |
| Timer control (standard) |
Limit switch for controling the stroke |
Pressure swith for controling the stroke end |
| Optional Safety Device: |
| 1. Punching (Pressing) is controlled by foot panel switch with sensor of safety. |
| 2. Punching (Pressing) is controlled by double push-button switch. |
| Application Punching |
| Aluminum frame, aluminum extrusion, leather, brass, plastic, steel. |
| Model |
JIH-250 A |
JIH-250 B |
JIH-250 C |
| Impulsive Force |
8 tons |
10 tons |
15 tons |
| Motor |
3HP |
3HP |
5HP |
| Stroke |
150mm |
150mm |
150mm |
| Punching Height |
250mm |
250mm |
250mm |
| Hydraulic Pressure |
150kg / cm² |
170kg / cm² |
210kg / cm² |
| Worktable Area |
245 x 500mm |
245 x 520mm |
350 x 650mm |
| Worktable Height |
750mm |
790mm |
910mm |
| Mechine Dia. (L x W x H) |
600 x 500 x 1750mm |
525 x 525 x 1820mm |
650 x 650 x 2150mm |
| Packing Dia. (L x W x H) |
690 x 690 x 1800mm |
625 x 625 x 1900mm |
750 x 750 x 2300mm |
| N.W. / G.W. |
310 / 400kgs |
350 / 450kgs |
550 / 650kgs |
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. |
