|
|
Long-Scale Processing |
Short-Scale Multiple Processing |
|
|
Short-Scale Multiple Processing |
For 4-Axis Processing (Optional) |
Machine Features
1. Choice of working lengths: 3.5, 4.5, 5.5 and 6.5 meters.
2. It is available for each short - scale multiple processing & long - scale processing.
3. traveling column features high positioning accuracy.
4. The column longitudinal traverse is driven through servomotor combined with gear/rack transmission.
5. X / Y axis traverse are driven through servomotor combined with ball screws.
6. Three axes travels and driven by servomotors.
7. High precision linear guide ways on three axes assure fast and smooth movements.
8. 24-tool magazine is standard equipment.
9. Air clamps for workpieces. (vises are option)
10. Emergency hold wire is provided at the front of machine for safety protection for the operator and the machine.
11. Movable chips are equipped at the bottom of the machine. providing convenient chip handling.
 |
PC-Based CNC Control
1. The machine is equipped with a PC-based CNC control as standard equipment. It is easy to learn and operate.
2. Upon request Mitsubish / Fanuc or Siemens CNC control is available (optional). |
 |
Arm Type Magazine
The ARM type magazine rotation is driven by a cylindrical cam for fast and dependable is 24 tools. Random tool selection provides highly efficient tool changing. |
 |
Oil Mist Cooling
The machine is equipped with an oil mist cooling system for efficient cooling of cutting tool and work piece. It not only extends the service life of the tool, but also ensures superior cutting quality. |
Standard Accessories
- Syntec CNC controller
- 24 tool ATC-arm type
- Oil mist cooling for tool
- Spindle air blast
- Auto lubricator for linear guide ways and ball screws
- Tool kit
- Telescopic cover for X, Y, Z axis
- Emergency hold wire
- Alarm light
Optional Equipment
|
|
CNC Controllers - Mitsubishi (M70) |
CNC Controllers - Fanue (OIMC) |
|
|
Lift-Up Chip Conveyer |
Screw-Type Chip Conveyer |
|
|
Opt Vise 1 |
Opt Vise 2 |
|
|
Spindle Oil Cooling Device |
Heat Exchanger On Cabinet |
|
|
Air Fence (Stopper) |
Tools / Tool Holder |
|
- Liquid cooling for tool
- Optical linear scale
- Work piece measurement
- Coolant through spindle
- CNC controllers-SIEMENS
- 4-axis processing
|
CE Mark |
|
| Travel |
| Model |
JIH-CNC6500 H Type |
| X-Axis Travel |
6,500 mm (Opt. 3500mm, 4500mm, 5500mm) |
| Y-Axis Travel |
510 mm |
| Z-Axis Travel |
510 mm |
| Spindle Center To Table Surface |
Min 160 mm, Max 670 mm |
| Table |
| Table Working Type |
3 sets T-slots |
| Table Working Surface |
500 x 6500 mm |
| Max. Loading Capacity |
1000 kg |
| T-Slots (No.x W x P) |
3 x 50 x 200 mm |
| Spindle |
| Spindle Speed |
8000 R.P.M. (Opt. 10000mm, 12000 R.P.M.) |
| Spindle Motor |
11 kw (15 HP) |
| Spindle Taper |
BT40 |
| Feedrate |
| Rapid traverse (X/Y/Z) |
X: 40 m/min, Y: 24 m/min, Z: 24 m/min |
| 3-Axes Servomotors |
X-Axis: 5 kw, Y-Axis: 3.5 kw, Z-Axis: 3.5 kw (Mitsubishi) |
| Repeat Positioning Accuracy |
X-Axis: ±0.025 mm, Y-Axis: ±0.01 mm, Z-Axis: ±0.01 mm |
| Cutting-Feed Rate |
F: 1 ~ 5000 mm/min |
| A.T.C. |
| Tool Storing Capacity |
24 tools |
| A.T.C. |
Arm-type |
| Tool Shank |
BT40 |
| Pull Stud |
45° |
| Max. Tool Length |
300 mm |
| Max. Tool Diameter |
100 mm |
| Max. Tool Weight |
7 kg |
| General |
| Machine Weight |
10000 kgs |
| Machine Dim. (L x W x H) |
9200 x 2250 x 2800 mm |
| Packing Dim. (L x W x H) |
9350 x 2400 x 3000 mm |
| Air Required |
6 kg/cm2 |
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. |
