HOME > Product > Cut-Off Saw > JIH-455 NC Fully Automatic High Production Sawing Machine > JIH-455 D Type

Picture of JIH-455 NC Fully Automatic High Production Sawing Machine for JIH-455 D Type
Feature
Automation feed, postioning, oil splashing and cutting

Horizontal Align
allows material to lean on the baffle plate and mininmize forward movement which guarantees accurate cutting.

Cutting angle with 90°
Sawblade Size:18" x 1" hore
Vacuum Oil Mist Unit
The vacuum oil mist unit employs vacuum generation principle to transform cutting fluid into oil mist for splashing. It provides lubrication and cooling functions, ensuring no dust deposit and sawblade, high cutting accuracy and long service life of sawblad.
Automatic Position System Specification:
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.
Standard Model
combined with a high speed cut off saw this effecitve device prepares the material for.
Graphical Interface System
Its easily understandable setup functions allow the user to instantly operate this piece of equipment.

Automatic Positioning System
Automatic positioning system the fast moving pusher reaches a maximumdistance of 60m/min with perfect positioning.
Touch Screen
the touch screen's function button allowspractical understanding thus bringing outthe best of this device.

Standard Equipment
18" Sawblade x 1pcs. (specified size is available), tool box x 1 pc

Optional Equipment
1. Dust collector and suction hose
2. Infeed and outfeed roller table
3. Sawblade
4. Automatic air blast system
5. Horizontal clampinhg
6. Horizontal align
7. Stopper

Depending on the working condition, the pusher can beused with different devises.

A: Automatic tracer system
B: Rolls of flat table
C: Baffle Plate: 90°
D: Baffle plate: 45°
E: Baffle plate: Angle adjustalbe Range 90°- 30°
F: Gripper system

the following maximizes the customers choice of equipment raising production ability and satisfying the customers high quality reuests
8. Automatic Feed Length:

  A B C E F
Length (L) 3000mm 4000mm 5000mm 6000mm 7000mm
Feed (L1) 2500mm 3500mm 4500mm 5500mm 6500mm

Model JIH-455D
Applicable Machine JIH-18C, D Type Other model in JIH - 18C series and JIH -24 series also can be equipped with JIH - AUTO 3000 to convert it into an automatic feed machine.
Cutting Capacity H120 x W200mm
(same as cutting capacity chart for model JIH - 18CD)
Spindle Motores 7.5HP
Sawblade Size 18" x 1" bore
Table Height From Floor 860mm
Air Pressure 6 - 8kgs/cm²

Automatic Position System Specification
Touch-Sending Screen 5.7"
Servo Motor 400w
Frequently Used Memory Module 100suite
Positioning Speed 20-60 m/min
Positioning Accurancy ± 0.10mm
Max. Holding Force 50kgs
Max. Pushing Force 50kgs
Max. Feed Length opt. length 2.5 ~ 6.5m

* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.