| Feature |
| 1. To operate the machine, simply treadle on the hand switch. the machine will automatically perform clampimg and cutting for convenient operation. single or multiple workpieces can be cut simultaneously. |
| 2. Feed is driven by hydraulic system, providing maximum stablity of cutting. |
| 3. Saw moves on linear guideway, that assures accurate and large cutting. |
| 4. Clamping system is controlled by an independent air cylinder and moves on linear guideway, that assures stable clamping. |
| 5. The clamping speed and cutting speed can be adjusted according to work piece type to achieve superior cutting performance ( Fast and stable cutting ). The clamping system clamps workpieces securely. |
| 6. Clamping pressure can be adjusted as desired to suit work piece type, that avoids damage on the work piece due to over-pressure. |
| 7. Sawblade feed strock can be adjusted according to limit sensor and quicky return button for saving cutting time. |
| 8. Accurately controlled oil mist system greatly improves lubrication and cooling effect, while reducing trouble to a minimum. |
| 9. Adjustable clamping height. |
| 10. Adjustable clamping height. |
| None Picture |
None Picture |
Micro Switch (The Front and Rear Feed Limit):
To control sawblade traveling and adjust the position according to the actual width of processing materials to save traveling time.
|
Clamping System:
Linear rail leading with high stability and the material is neat and tight. |
| Suitable For Cutting Various Materials |
| Aluminum, Brass, Heat Sink, PVC, Plastic Steel, Bakelite, Acrylic Plastic, Teflon, Honeycomb Board, Wood And Other Non-Ferrous Metals |
| Standard Accessories |
| Sawblade x 1pcs, Replace Sawblade Tool |
| Optional Equipment |
| Infeed And Outfeed Roller Conveyor, Dust Outlet, Dust Hood, Dust Collector, Guard, Horizontal Clamping, Hydraulic Feed System, Inverter |
| JIH - 30L |
A Type |
B Type |
| Table Height Form Floor |
840mm |
900mm |
Cutting Capacity
(W x H) |
500 x 120mm
550 x 80mm
600 x 20mm |
550 x 265mm
850 x 130mm
900 x 20mm |
Sawblade Sizes |
16" or 18" (bore25.4mm) |
28" o r30" (bore50mm) |
| Spindle Speed |
3200R.P.M. |
1500R.P.M. |
| Spindle Motor |
15HP |
15HP |
| Hydraulic Motor |
2HP |
2HP |
| Air Pressure |
4-6kgs/cm² |
4-6kgs/cm² |
| Table Area |
950 x 700mm |
1710 x 1090mm |
| N.W. / G.W. |
1200kgs / 1450kgs |
1800kgs / 2100kgs |
Machine Diamesions
(L x W x H) |
2050 x 1750 x 1750mm |
2300 x 1800 x 2200mm |
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. |
