|
|
|
|
> > > > |
|
 |
|

| Feature |


|
- When the foot panel switch is pressed the machine will perform material clamping and cutting automatically.
- Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
- Vertical and horizontal workpiece clamping design ensures extremely firm for any type of aluminum workpiece.
- Work piece clamping pressure is adjustable to eliminate material deformation problem.
- Automatic oil mist colling for sawblades provides burr-free surface of cut, while extending sawblade life.
- Alternatively sawblades straight feed in horizontal direction allows large cutting width.
- Equipped with wear-resistant linear motion guides for accurate angle of cut.
- Allows for right or left cutting individually.
- Right and left cutting alternatively fully eliminates waste of workpice.
- Cutting angle is easy to adjust.
- Gap between gauge and sawblade is adjustable no burr after sawing.
- Both side of the machine are equipped with a 2.4m infeed and a 2.4m outfeed conveyor table for convenient repetitive.
- The machine performs a 45 degrees miter cut. Designed for high speed cutting of extrudes strip, door and window frames.
|
| Model |
JIH-12 |
| Cutting Angle |
45° |
| Cutting Width |
140 mm / 160 mm |
| Cutting Height |
90 mm / 70mm |
| Sawblade Sizes |
Ø12" x Ø1" x 2pcs |
| Sawblade Speed |
3200R.P.M. |
| Spindle Motores |
2HP x 2 |
| Clamping Method |
4 (2 Vertical Clamps + 2 Horizontal Clamps) |
| Table Area |
1160 x 150 mm |
| Table Height From Floor |
840mm |
| Infeed/Outfeed Conveyor Length |
2400 mm |
| Net/Gross Weight |
360 / 460kgs |
| Machine Dim. (L x W x H) |
1500 x 880 x 1150mm |
| Packing Dim. (L x W x H) |
1620 x 1000 x 1350mm |
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. |
|
|
|
| |
|
|