| Feature |
| 1. When the foot panel switch is pressed the machine will perform material clamping and cutting automatically. |
 |
| 2. Cutting feed is driven by an air/hydraulic combination power for smooth feed speed. |
| 3. Vertical and horizontal workpiece clamping design ensures extremely firm for any type of aluminum workpiece. |
| 4. Work piece clamping pressure is adjustable to eliminate material deformation problem. |
| 5. Automatic oil mist colling for sawblades provides burr-free surface of cut, while extending sawblade life. |
| 6. Alternatively sawblades straight feed in horizontal direction allows large cutting width. |
 |
| 7. Equipped with wear-resistant linear motion guides for accurate angle of cut. |
| 8. Allows for right or left cutting individually. |
| 9. Right and left cutting alternatively fully eliminates waste of workpiece. |
| 10. Cutting angle is easy to adjust. |
| 11. Gap between gauge and sawblade is adjustable no burr after sawing. |
| 12. Both side of the machine are equipped with a 2.4m infeed and a 2.4m outfeed conveyor table for convenient repetitive. |
| 13. The machine performs a 45 degrees miter cut. Designed for high speed cutting of extrudes
strip, door and window frames. |
