|
Infeed And Outfeed Roller Convey (Optional)
| Feature |
1. When the foot panel switch is pressed the machine will perform material clamping and cutting automatically.
2. Horizontal cutting and Saw moves on linear guideway, that assures accurate and large cutting.
3. Cutting feed is driven by an air/hydraulic combination power for smooth feed speed.
4. Two vertical workpiece clamping design ensures extremely firm for any type of aluminum workpiece.
5. Work piece clamping pressure is adjustable to eliminate material deformation problem.
6. Automatic oil mist cooling for sawblades provides burr-free surface of cut, while extending sawblade life.
7. Alternatively sawblades straight feed in horizontal direction allows large cutting width.
8. Equipped with wear-resistant linear motion guides for accurate angle of cut.
9. Cutting angle is easy to adjust.
10. Gap between gauge and sawblade is adjustable no burr after sawing. |
 |
The machine performs a 45 degrees miter cut. Designed for high speed cutting of extrudes strip, door and window frames. |
 |
Horizontal cutting and saw move on linear guide way, that assure accurate and large cutting. |
 |
Special mold for irregular frame - optional. |
| Standard Equipment |
| 14" Sawblade x 2pcs, Replace Sawblade Tool |
| Optional Equipment |
| Infeed And Outfeed Roller Conveyor, Dust Collector, Guard, Hydraulic Feed System |
| Model |
JIH-350 L Type |
| Cutting Angle |
45° |
| Cutting Width |
320mm |
| Cutting Height |
70 mm (For 90mm opt.) |
| Sawblade Size |
Ø14" x Ø1" x 2Piece |
| Spindle |
3200R.P.M |
| Motor |
2HP x 2 |
| Clamping System |
2 sets of vertical clamping |
| Worktable Size |
500 x 320mm |
| Worktable Height |
840mm |
| Infeed/Outfeed Length (Opt.) |
1~7M (opt.) |
| N.W. / G.W. |
650 / 780kg |
| Machine Diamesions (L x W x H) |
1930 x 725 x 1300mm |
| Packing Diamesions (L x W x H) |
2050 x 845 x 1500mm |
* All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice. |
